Pipe Clamp for Air-termination Rods
Details
For fixing as well as lightning-current-carrying-capable contacting of the air-termination rod e.g. at metal subconstructions of photovoltaic (PV) installations (square hollow profile); typically installed at steel skeleton or reinforced concrete structures. For mounting at pipes, the pressure plate (flat plate 2x angled) has to be removed. Each air-termination rod has to be installed with two pipe clamps.
The maximum free length of the respective air-termination rod according to the wind load has to be considered for the installation.
The maximum free length of the respective air-termination rod according to the wind load has to be considered for the installation.