Surge protection whatever the weather - DEHNpatch outdoor
For PoE cameras and Ethernet applications
Extreme weather conditions? Dust, ice, sand, rain, snow… no problem!
The DEHNpatch outdoor surge arrester protects your IP and gigabit Ethernet applications.
Reliable IP66 enclosure.
As an expert for safety, monitoring and network communication, you will be familiar with this problem: surge arresters are often installed in extremely exposed locations. Up to now, that meant that they had to be laboriously protected against weather-related influences. This cost time, required an additional weatherproof enclosure and made maintenance more complex.
Now it’s quicker and easier: with the all-in-one solution consisting of surge protection, enclosure and mounting bracket.
Optimum Protection for use in Outdoor or Industrial applications
You are also flexible in terms of mounting. You decide whether to mount it on a pole or a wall, horizontally or vertically – all no problem at all thanks to the practical, universal mounting bracket.
Cable sealing grommet also provides strain relief
Housing screws are captivated to prevent loss during installation
Integrated mounting bracket for wall or pole installation
In a nutshell: Your advantages with DEHNpatch Outdoor
- No EB conductor needed
Equipotential bonding via the enclosure. If fastened to a metal pole, no additional EB conductor is needed.
- Screws fixed in place
The enclosure screws are secured against falling out – especially advantageous when mounting.
- Protection against moisture
The integrated pressure equalising membrane prevents condensation in the enclosure.
- High degree of protection
The sealing prevents moisture from penetrating the enclosure (IP66)
- Cover secured
The two halves of the enclosure are securely linked by the EB conductor – this makes mounting easier because there are no loose parts to fall down.
- Strain relief
The pre-assembled cable is precisely sheathed. The plug stays securely in the socket even if there is tension on the cable.
- Universal mounting bracket
Can be mounted on a pole or a wall (horizontally or vertically)
- Only ONE screwdriver needed
Very practical: all screws can be tightened with a PH1 screwdriver. This saves mounting time.