Public Download Area --> Publications - E --> Surge Protection --> Productinfo

LSA (DS 145)

[0,71 MB]


LSA with lightning current carrying capacity - surge arrester and enclusure system

The DEHNrapid LSA lightning current arrester for LSA disconnection blocks protects senitive hardware effectively from surges and allows for simultaneous testing, disconnecting, and patching of connected lines.

RED/LINE (DS 148)

[0,38 MB]


RED/LINE:

  • DEHNventil® modular - "All in one": Lightning equipotential bonding and protection for terminal equipment in one device
  • DEHNguard® modular - Complete prewired units for common system configurations and single-pole surge arrester for universal use
  • DEHNrail modular - Two-pole surge arrester Type 3, consisting of a base part and plug-in protection module (easy exchange by module release button)

BLITZDUCTOR® XTU (DS 164)

[1,56 MB]


BLITZDUCTOR® XTU
Universal lightning current and surge arrester with actiVsense

  • Automatically detects the operating voltage of
  • the wanted signal from 0 to 180 V
  • Optimally adjusts the voltage protection level to
  • the operating voltage currently applied
  • Low voltage protection level, also suited for the
  • protection of terminal equipment
  • Reduction of the variety of types
  • Only one type of SPD for different signal lines
  •  Easy planning and storage
  • Can be easily retrofitted

BLITZDUCTOR® XT (DS 143)

[0,89 MB]


BLITZDUCTOR® XT with LifeCheck®

  • Combined lightning current and surge arrester
    - Maximum discharge capacity for two-, three- or four-pole interfaces
    - Lightning current carrying capacity up to 10 kA (10/350 µs)
    - Low voltage protection level, also suited for the protection of terminal equipment
  • SPD consists of a protection module and base part
    - Easy replacement of protection modules with little effort
    - Base part incorporates make-before-break switch contact for insertion and removal without interruption
    - All protection components integrated in the protection module
  • Functional and appealing design
    - DIN rail mounting with integrated earthing
    - Minimum space requirements, 2 pairs over a width of 2/3 modules
    - Vibration- and shock-proof for safe operation

DEHN protects Medium Voltage Systems (DS 125)

[1,79 MB]


DEHN protects Medium Voltage Systems

Resistant against environmental influences thanks to Hydrophobic Silicone Enclosure.

DEHNmid

  • DMI...L: Unit without shed; for indoor application
  • DMI...N: Normal creepage distance; for outdoor application
  • DMI...H: Increased creepage distance; for outdoor application